Xerox 3030 Engineering Copier
Features
- Compact footprint (57 inches wide by 27 inches deep) 115 volt, 20 amp power requirements
- LED status display and control panel with easy-to-understand dual-language message display and straightforward user interface graphics
- Built-in Auditron lets you track usage by specific job or project
- Attractive appearance and quiet operation.
A Powerful Package: Productivity Where You Need It... When You Need It.
The Xerox 3030 Engineering Copier is a point-of-need plain-paper copier with powerful productivity features. It's compact and environmentally friendly. The 3030 gives you walk-up convenience, automatic operation and a clear, easy-to-use graphic interface. Taking full advantage of the 3030's functionality is as simple as pushing a few buttons.
In terms of paper and toner, it takes only small change to make a copy. Until you factor in the element of time. The time it takes to send out for copies. The time spent walking the halls to the reprographics department. Some copying jobs have a way of turning small change into big bucks.
But there's also an opportunity for big savings. The Xerox 3030 Engineering Copier can help you realize that opportunity. It's a point-of-need plain-paper copier with powerful productivity features. And it's compact, aesthetically pleasing and environmentally friendly.
The 3030 gives you walk-up convenience, automatic operation and a clear, easy-to-use graphic interface. Taking full advantage of the 3030's functionality is as simple as pushing a few buttons.
A World Of Copying Options--At The Point Of Need
Copy from original drawings, bluelines, sepias, CAD plots and cut-and-tape composites onto bond, vellum or film. Produce up to 15 copies from a single feed. Select automatic Synchro-cut or key in specific cut length. The 3030 makes size-for-size copies up to 36 inches wide by any manageable length at a speed of four D-size copies per minute.
Roll-Fed Media Loading Is Quick And Easy
There's a manual bypass for feeding cutsheet media. And our standard copy stacker and optional document stacker deliver added convenience and operator efficiency for handling copies and originals.
Change Is Inevitable. That's Why Your Engineering Documents Have To Be Flexible.
With the 3030, you can keep your documents as dynamic as your technology. Drawing elements can be updated via cut-and-tape editing methods to form new concept drawings quickly, right in the drawing room. Remember, your productivity is directly related to the flow of engineering information. With a 3030 at the point of need, you can make sure that vital flow won't get bogged down.
The Quality Of Your Information Is Directly Related To The Quality Of Your Documents.
You can be sure that your documents will be crisp and clear, because the Xerox 3030 uses high-quality xerographic imaging technology. This helps eliminate mistakes whether you're putting together a bid set, on the manufacturing line, at the job site or in prototype development.
Restore old drawings (opaque, translucent, pasteups, bluelines) to "like new" condition, with the added storage and handling benefits of plain-paper media. The 3030 gives you added control of copy quality in terms of contrast and density.
The 3030 protects your investment in information and helps you maintain the quality of your documents over the long haul.
Basic Specification
Document Input
Maximum size 36" x 20' long in single copy mode; 36" x 60" long multicopy mode
Minimum size 8 1/2" x 11" (portrait)
Types Opaque, translucent and transparent documents. Note: A document carrier
(8R3628) is recommended for damaged or very delicate documents
Productivity
Warm-up time Standby less than 3 minutes; cold start 5-7 minutes
First Copy Out Time (FCOT) Less than 20 seconds D size (24" x 36")
Multiple copies Selectable, 1-15 copies per document
Copy throughput 2 E size (36" x 48") per minute; 4 D size (24" x 36") per minute;
6 C size (18" x 24") per minute
Media
Type 20 lb. xerographic bond, 20 lb. xerographic Zero Solvent vellum and .004
drafting film
Media Supply Roll stock selectable from one on-line feed roll; either 36" x 500'
bond or vellum or 36" x 150' .004 drafting film.
(Manual bypass for special media applications)
Physical Characteristics
Product size Height 46.25"; Width 57"; Depth 27"; Weight: 500 lbs
Installation Space 105" x 87"
Agency approvals UL and CSA
Power Requirements 115 VAC/20 amp dedicated line
Options
Work Organizer - convenient storage tray for originals enhances operator
efficiency; provides easier handling of valuable originals
CVA Printer - lets you print out data from your Auditron for reporting, billing
and budgeting purposes
Document Stacker - used to stack documents when copying sets of originals
Long Document Guides - enable easy handling of long original